Showing posts with label level spreader. Show all posts
Showing posts with label level spreader. Show all posts

Wednesday, August 19, 2009

Day 69: More metal roofing and tree pruning

The folks from Wildcat Metals were back again today. They completed installation of almost all of the main home roof panels.

I took this video of the seamer used to make the mechanical connection between panels.



Here is a pic of the underside of the seamer.

This was the last day we had the telehandler, so we used it to assist with pruning the trees next to the north side of the home. There were many dead branches that must be removed to help maintain defensible space against a wildfire. We also removed a small tree that was very strained from nearby construction trenches over the past 2 years. I am always sad when a tree is cut down, but the 2 neighboring trees will be healthier. All of the smaller branches will be run through a woodchipper and turned into garden mulch. The larger branches will make heat in Justin's woodburning stove. Here is a pic from the west at the end of the day.

Other tasks from day 69:
  • Trevor completed installation of the level spreader
  • Justin and I completed installation of the trim board under the eaves
  • Coady continued routing vent pipes for the sewer lines and began installing the rough valves for the fixtures
Thanks for reading. Please feel free to leave a comment.

Monday, August 17, 2009

Day 67: Metal roof panels

This was one of the days I was really looking forward to. The home will have a Standing Seam Metal Roof (SSMR). The panels are too long to be delivered practically, so Wildcat Metals and RMS Supply brought the portable manufacturing equipment to the job site. The fabrication process involved 2 steps. First, material from a coil of steel was passed through a roll forming machine to make a flat panel. The machine automatically advanced the material, formed all of the bends and cut the panel to length – see vid below.



This is the type of panel that would be installed on roof with flat sections. In the second step, the panel was run through a panel curver that stretched both vertical ribs in the panel to add the curvature necessary to fit on my curved roof – see vid below.



So a pile of flat panels like this:

Was quickly turned into a pile of curved panels like this:

Other tasks from day 67:
  • Marty sprayed the wood in the unfinished eaves with a homebrewed concoction that should reduce the potential for termite infestation in the roof lumber
  • Trevor connected an extension to the existing level spreader
  • Justin framed up the interior walls of the closet
  • Carlos completed the fire sprinkler installation
Green comment for today:
Look for one solution that solves 2 or more problems. I have procrastinated planting seeds over an old backfilled trench for weeks because the soil was full of rocks that needed to be removed. When Trevor connected the level spreader today, it was obvious that he needed plenty of rocks to backfill the trench effectively. Trevor and I scoured the old backfilled trench area to collect rocks. We used these rocks to backfill the level spreader trench. Now the old backfilled trench where I want to seed is free of rocks. This was also a great use of on site resources. Thanks for reading. I appreciate your comments.

Tuesday, May 12, 2009

Day 2: Setbacks (not those lines on the site plan your building must stay clear of)

Unfortunately, we discovered today that the water supply line for my neighbor's home was run underneath my foundation location. In the picture below, the trench on the left contained my neighbor's water line. The trench on the right is where the water line had to be rerouted to avoid my foundation. The majority of the day was spent solving this problem. Another couple hours were lost while a leaking backhoe hose was replaced.

The geotechnical engineer made a site visit to check out soil quality in the foundation cut. He ordered that the top 3 feet of soil on the West half of the subgrade be removed and replaced with soil more suitable for compaction. The sandy "topsoil" I mentioned yesterday will be adequate to mix with the removed soil. At least the on-site material is acceptable, just in the wrong place ;-)

On the upside, the level spreader trench was dug and the crew's porta potty was delivered. I hope tomorrow moves a little bit more in the positive direction. Until then, thanks for reading, and feel free to leave a comment.

Monday, February 23, 2009

Catching up to the 21st century, part 12...neighbor's home construction


July, 2007

Construction started on my land partner's (K) home. This created several opportunities to share infrastructure costs - one of the advantages of sharing land with another party.
  • Septic System - K and I installed a 2000 gallon septic tank with a leach field approved for both his home and my home. The system uses chamber leaching devices which are slightly more environmentally friendly than rock trenches due to their smaller footprint.

  • Water Supply System - In my county, a home requires a 5000 gallon water storage tank hooked up to a hydrant for the fire department to use in case of a fire. Both K and I bought 5000 gallon tanks, but we shared the pressurization pump and fire hydrant. The hydrant had to be located between 50 and 150 feet from both homes. Fortunately, I knew roughly where my home would be built. We found a convenient location for a shared hydrant.

  • Drainage System - On my property, the roof runoff through gutters must be directed to a device called a level spreader which diffuses the runoff and spreads it over an appropriately sized land area. K and I shared in the trenching and installation of the level spreader and water lines leading to the level spreader.

  • Electric - The local utility (PG&E) required a connection to the main transformer supplying power to our parcel and the 3 parcels that neighbor ours. K and I shared this connection fee as well as the cost of trenching the underground conduit to a splice box near our future home's utility room.
Each of these systems will be ready for a simple hookup in the future when my home is built. Thanks for reading. As always, your comments are appreciated.